HyTouch urinal flush control, infrared-controlled, battery operation, Mambo. For automatic flush actuation of urinals For use with Geberit 111.625 urinal elements For new installations or retrofit to existing Geberit 111.625 urinal frame installs For concealed installation in urinal installation elements with front actuation For automatic hands free sensing and flush actuation, in hygienic or ADA compliant applications For low consumption urinal flushing volumes to 0.5 GPF (2 LPF) Not for use with 111.630, 111.650, 111.679 and 111.685 urinal elements Proven infrared triangulation detection method with background fade-out and auto-calibration to environment Latching solenoid valve with chloramine resistant EPDM diaphragm and protected by dual-stage filters Vandal resistant stainless steel cover plate, with securing bar and independent sensor electronics to prevent tampering Low battery warning (2-stage: flashing LED when battery starts to go low continuous red light when cannot flush) Tool-free maintenance, with access to battery box and flush valve behind the actuator plate Dynamic flushing time reductionduring periods of high traffic to reduce water consumption Humidity 100 % relative Cover plate with infrared window (replaceable), and with securing bar Infrared control, premounted on fixation frame Solenoid valve Fastening material (including battery box and 2x lithium batteries AA)Automatic hygiene flush: 24 h after last flush cycle Country of Origin: DE Detection distance: 4 - 20 in (10 - 50 cm) Each Height (in): 2-5 9 Each Length (in): 11-4 5 Each Width (in): 10 Finish: Brushed stainless steel Flow rate at 15 psi (1 bar): 3.8 4.7 gpm without flow limiter (0.24 0.3 l s) Flush time: 3 - 15 s (default time 4 s) can be manually adjusted Max. fluid temp: 86 °F (30 °C) Operating pressure range: 14 - 116 psi (1 - 8 bar) Operating voltage: 3 V DC Power input 0.5 W (Battery lifetime: Lithium ~ 2 years Alkaline ~ 1.5 years) User detection time: 7 s |