The austral ii is a high efficiency wood stove in the xl wood stoves category. This leg model is epa certified and is mobile home approved. Its large firebox allows it to fit logs up to 20 inches long. The optional crossflow blower is sold separately.This appliance is officially tested and certified by an independent agency Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb ft³ and 20 lb ft³ Other performances are based on a fuel load prescribed by the standard The specified loading density varies between 7 lb ft³ and 12 lb ft³ The moisture content is between 19% and 25% As measured per csa b415.1-10 stack loss method Higher heating value of the fuel Lower heating value of the fuel Performances based on a fuel load prescribed by the standard at 7 lb ft³ and with a moisture content between 19% and 25% Optimum overall efficiency at a specific burn rate (lhv) Carbon monoxyde Limited lfetime warrantyApproved for a Mobile Home Installation: Yes Average CO: 165.6 g h Average Overall Efficiency: 67.5 % (HHV) 72.9 % (LHV) Average Particulate Emissions Rate: 4.5 g h Baffle Type: High Quality Vermiculite Canadian Standard: CSA B415.1-10 Canadian Standard (Safety): ULC S627 Centre Line of Flue Outlet to The Back: 6-3 4 Centre Line of Flue Outlet to The Side: 11-7 8 Collection: Austral II Depth: 29-3 4 Door Opening Height: 11-1 2 Door Opening Width: 15-1 2 Door Type: Single, Glass with Cast Iron Frame Firebox Depth: 21-1 4 Firebox Height: 14-7 8 Firebox Volume: 3.4 Firebox Width: 18-3 8 Flue Outlet Diameter: 6 Fuel Type: Dry Cordwood Glass Surface: 14W x 10-1 8H Glass Type: Ceramic Glass Height: 31-1 2 Log Positioning: Over Width Maximum Burn Time: 10 h Maximum Heat Output (Dry Cordwood): 90,000 BTU h (26.4 kW) Maximum Log Length: 20 Minimum Chimney Height: 12' Optimum Efficiency: 75 % Overall Heat Output Rate: 11,700 BTU h (3.4 kW) to 26,400 BTU
