The escape 1800 is a high efficiency, epa certified wood stove. This pedestal model is an east-west loader that accepts logs up to 20 inches long. It comes with a top heat exchanger that allows the user to maximize the benefits of its optional blower. Its very low clearances to combustible materials make it a safe bet in the large wood stoves category.This appliance is officially tested and certified by an independent agency Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb ft³ and 20 lb ft³ Other performances are based on a fuel load prescribed by the standard The specified loading density varies between 7 lb ft³ and 12 lb ft³ The moisture content is between 19% and 25% As measured per csa b415.1-10 stack loss method Higher heating value of the fuel Lower heating value of the fuel Performances based on a fuel load prescribed by the standard at 7 lb ft³ and with a moisture content between 19% and 25% Optimum overall efficiency at a specific burn rate (lhv) Carbon monoxyde Limited lifetime warrantyApproved for a Mobile Home Installation: Yes Average CO: 137.4 g h Average Overall Efficiency (EPA cribs Douglas fir): 69.5 % (HHV) 75.2 % (LHV) Average Particulate Emissions Rate: 3.9 g h Baffle Type: High Quality Vermiculite Canadian Standard (Emissions): CSA B415.1-10 Canadian Standard (Safety): ULC S627 Centre Line of Flue Outlet to The Back: 6-3 4 Centre Line of Flue Outlet to The Side: 12-7 8 Collection: Escape Depth: 26-3 4 Door Opening Height: 9 Door Opening Width: 17-1 2 Door Type: Single, Glass with Cast Iron Frame Firebox Depth: 16-1 2 Firebox Height: 12 Firebox Volume: 2.4 Firebox Width: 21 Flue Outlet Diameter: 6 Fuel Type: Dry Cordwood Glass surface: 16W x 9-1 4H Glass type: Ceramic Glass Heat Output Rate (min. to max.): 12,500 BTU h (3.7 kW) to 31,300 BTU h (9.2 kW) Heating Area: 500 - 2,100 Height: 32-5 8 Log Positioning: Ove
